序号

产品名称

数量

简要技术规格

备注

1

多功能医用吊塔

10

1、主要技术参数、性能规格：

1.1、 吊塔、气体终端为同一品牌，气体终端原厂生产，非OEM、外购第三方品牌产品。提供书面证明文件。

1.2、 吊塔同品牌正压原理专用麻醉废气排放装置，禁止使用直接负压抽吸，提供麻醉废气排放装置结构图文说明文件，备实物备查。

1.3、 吊塔内部气体软管须采用橡胶材质，不得采用PVC材质，备实物备查。

1.4、 吊塔轴承的基本额定动载荷≥10000KG；基本额定静载荷≥60000KG。吊塔轴承须采用推力滚针轴承，其滚针硬度≥60HRC。提供证明文件。

1.5、 吊塔采用高强度铝镁合金材料，圆弧形全封闭式设计，表面无锐角，无螺丝钉外露。材料必须防腐蚀，便于清洗。适合医用洁净环境。

1.6、 吊塔气电分离设计：吊塔箱体底端必须有氧气泻流孔设计，保证氧气意外泄漏的顺利排出，防止出现塔内氧气蓄积并与电源线造成火灾意外；必须提供图片或实物证明。

1.7、 气体终端要求（提供证明文件）：

（1）所有气体终端为原厂产品，与吊塔同品牌。气体插头需带有正向止回阀设计，防止气体倒流。

（2）所有气体接口必须带三状态：通、断、拔，插座插头可保证2万次以上的插拔，带气可拆卸式正面维修。

（3）各类气体插座需符合ISO标识标准，均为不同颜色和不同形状,并且具有六滚珠式设计，（提供六滚珠设计的图片或实物证实），具备防误插功能。

（4）三密封圈、弹片设计，确保各个部件均可拆卸并能正面维护。（提供实物结构图证明）。

（5）有ISO EN737或DIN 13260 认证，吊塔上所配套气体终端须和吊塔为同一品牌，由吊塔制造厂家原厂生产。

2、桥架式吊塔技术参数要求：共2台

2.1、 桥架式吊塔，吊塔主体横梁圆弧形全封闭式设计，表面无锐角，无螺丝钉，吊塔定位准确，下垂头不易漂移。

2.2、 高强度铝镁合金材质，抗金属疲劳强度高，长时间负重不变形。

2.3、 桥架式吊塔横梁长度2200mm-3500mm可供选择，最终可根据医院实际场地情况确定。

2.4、 桥架式吊塔所有电路、气体管道内置于横梁内，通过塔体内走线连接吊头。无需另外通过其他裸露在横梁与吊头之间的管道相连接。

2.5、 桥架式吊塔照明阅读灯，内置于吊塔横梁中, 和吊塔设备一体，节约空间。

2.6、 桥架式吊塔间接照明灯安装位置在横梁朝天花板方向内，灯光向上照射，夜间不影响病人休息。

2.7、 桥架式吊塔干湿区共用，下垂头为吊架式结构，两侧吊杆，中间托盘，前后通透，托盘位于吊头正下方，重心稳固，适宜承载各种规格尺寸的仪器。可以沿横梁水平移动，配备摩擦刹车。提供厂家盖公章图片文字证明文件原件。

2.8、 桥架式吊塔托盘的上下距离可调，可固定在两侧吊杆上任意位置，调整高度后吊杆上不会有任何缺口。提供厂家盖公章图片文字证明文件。

2.9、 桥架式吊塔下垂头吊杆为圆形钢管设计，表面光滑，无缺口。可在吊杆上任意高度位置安装双关节旋转伸展臂、托盘等配件。提供厂家盖公章图片文字证明文件。

2.10、 桥架式吊塔吊架旋转角度≥330°，吊塔的吊头在病床两侧横向运行距离+/-550mm。

2.11、 桥架式吊塔承重负载能力≥250Kg，下垂头起重能力≥150Kg。

2.12、 配置要求：

1）每套下垂头配二层设备托盘，第二层托盘配推拉式抽屉1个， 共3套；

2）双关节旋转伸展臂2个，双臂长300mm+300mm，共2×3个；

3）高度可调输液杆  2个，共2×3个；

4）德制气体插座（干湿区：氧气×5，空气×3，负压×5），共13×3个；

5）12个中制电源终端，共13×3个；

6）网络接口RJ45  2个，共2×3个；

7）配卡箍和夹具保证管、线有序的人性化装置。

NO.

Product Name

Quantity

Main Technical Data

Remarks

1

Multi-functional medical cranes

1

1, main technical parameters and performance specifications:

1.1, cranes, gas terminal for the same brand, factory production, gas terminal of OEM, outsourcing third party brand goods. Provide written documents.

1.2, cranes with brand positive pressure principle dedicated anesthetic exhaust device, banning the use of negative pressure suction, directly provide anesthesia exhaust device structure graphic description file, prepare material for future reference.

1.3, the rubber material should be used in cranes internal gas hose, shall not use PVC material, prepare material for future reference.

1.4, cranes, bearing the basic dynamic load rating of 10000 kg or more; Basic rated static load or 60000 kg. Should be used in cranes bearing thrust needle roller bearing, the needle roller hardness or 60 HRC. Provide supporting documents.

1.5, cranes with high strength aluminum magnesium alloy materials, fully enclosed design of circular arc form, surface without acute Angle, no screws exposed. Material must be corrosion resistant, easy to clean. Suitable for medical clean environment.

1.6, cranes gas-electric separation design: cranes must have oxygen in the lower end of the box body of effusion hole design, guarantee the smooth oxygen accidental leakage discharge, and prevent the accumulation of oxygen in the tower and the power cord cause fire accident; Must provide photos or physical proof.

(provide documents required, gas terminal 1.7) :

(1) all gas terminal for the original products, brand with cranes. Gas plug with a positive check valve design, to prevent the reverse gas.

(2) all gas interface must take three status: communication, break, pull, plug socket plug can ensure more than 20000 times, with removable type positive maintenance.

(3) all kinds of gas outlet must be in accordance with ISO standard logo are different colors and different shapes, and have six ball type design, (six ball design pictures or physical proof), have mistakenly put prevention function.

(4) three sealing ring and shell design, make sure that the parts are detachable and can be positive maintenance. (provide physical structure of evidence).

(5) have ISO EN737 or DIN 13260 certification, the cranes on the supporting gas terminal and cranes for the same brand, by the original factory cranes manufacturer production.

2, bridge frame crane tower technical parameter requirements: a total of 2 units

2.1 posture cranes, bridge cranes main beam totally enclosed design of circular arc form, surface without acute Angle, no screws, cranes accurate positioning and the blue is not easy to drift.

2.2, high strength aluminium magnesium alloy material, metal fatigue strength is high, the load deformation for a long time.

2.3, bridge mounted cranes beam length is 2200 mm - 3500 - mm to choose from, finally according to the hospital actual site situation.

2.4, bridge mounted cranes all circuit, gas pipe in the bar, go through the tower body line hanging head. Need other through other bare pipe connected between the beams with hanging head.

2.5 posture cranes reading lamp lighting, bridge, built into beam cranes, cranes and equipment integration, save space.

2.6, bridge frame crane tower indirect lighting installation location within the beam in the direction of the ceiling, lighting up illuminate, does not affect the patient to rest at night.

2.7, bridge type crane tower dry wet area share, under the blue for the hanger type structure, on both sides of the derrick, the middle tray, connect fully, before and after the tray is located in the crane head directly, centre of gravity is strong, suitable for carrying all kinds of the size of the instrument. Can be along the beam horizontal move, equipped with the friction brake. Provide original factory official seal image text documents.

2.8 and bridge type crane tower tray and distance is adjustable, can be fixed on the two side derrick at any position, adjust the height on the derrick after there is no gap. The official seal image text documents provide manufacturer.

2.9, bridge frame under blue derrick crane tower for circular steel tube design, smooth surface, no gap. Can be any height on the derrick position installed double joint rotation stretch arms, tray and accessories. The official seal image text documents provide manufacturer.

2.10 frame crane, bridge crane frame rotation Angle 330 °, or cranes hanging head on both sides of the bed transverse distance running + / - 550 - mm.

2.11, bridge mounted cranes bearing load capacity 250 kg or more, under the blue hoisting capacity 150 kg or more.

2.12 requirement, configuration information:

1) blue with 2 devices under each tray, the second drawer tray with a push-pull type 1, a total of 3 sets;

2) Rotation stretch arm 2, double arms 300 mm + 300 mm long, 2 x 3;

3) the height is adjustable infusion rod 2, a total of 2 x 3;

4) din gas outlet (dry and wet area: oxygen x5, air x 3, negative pressure 5), a total of 13 x 3;

5) 12 Chinese system of power supply terminals, a total of 13 x 3;

6) network interface RJ45 2, a total of 2 x 3;

7) band and fixture ensure pipe, line orderly humanization device.