森林舞会游戏机

图片

广东省洁净技术行业协会

banner
首页 森林舞会游戏机： 森林舞会游戏机：

深圳市罗湖区妇幼保健院多功能医用吊塔采购项目公开招标公告

  • 发布时间：2014-12-24
  • 编辑：管理员

 

深圳市三方诚信招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2014-12-16在中国国际招标网公告。 本次招标采用传统招标方式，现邀请合格投标人参加投标。
1、招标条件
项目概况：本项目为深圳市罗湖区妇幼保健院多功能医用吊塔采购项目
资金到位或资金来源落实情况：资金来源已落实
项目已具备招标条件的说明：本招标项目的资金已落实，招标文件已编制完善，已具备招标条件
2、招标内容：
招标项目编号：0832-1441SFCXA021
招标项目名称：深圳市罗湖区妇幼保健院多功能医用吊塔采购项目
项目实施地点：中国广东省
招标产品列表(主要设备)：
序号
产品名称
数量
简要技术规格
备注
1
多功能医用吊塔
10
1、主要技术参数、性能规格：
1.1、 吊塔、气体终端为同一品牌，气体终端原厂生产，非OEM、外购第三方品牌产品。提供书面证明文件。
1.2、 吊塔同品牌正压原理专用麻醉废气排放装置，禁止使用直接负压抽吸，提供麻醉废气排放装置结构图文说明文件，备实物备查。
1.3、 吊塔内部气体软管须采用橡胶材质，不得采用PVC材质，备实物备查。
1.4、 吊塔轴承的基本额定动载荷≥10000KG；基本额定静载荷≥60000KG。吊塔轴承须采用推力滚针轴承，其滚针硬度≥60HRC。提供证明文件。
1.5、 吊塔采用高强度铝镁合金材料，圆弧形全封闭式设计，表面无锐角，无螺丝钉外露。材料必须防腐蚀，便于清洗。适合医用洁净环境。
1.6、 吊塔气电分离设计：吊塔箱体底端必须有氧气泻流孔设计，保证氧气意外泄漏的顺利排出，防止出现塔内氧气蓄积并与电源线造成火灾意外；必须提供图片或实物证明。
1.7、 气体终端要求（提供证明文件）：
（1）所有气体终端为原厂产品，与吊塔同品牌。气体插头需带有正向止回阀设计，防止气体倒流。
（2）所有气体接口必须带三状态：通、断、拔，插座插头可保证2万次以上的插拔，带气可拆卸式正面维修。
（3）各类气体插座需符合ISO标识标准，均为不同颜色和不同形状,并且具有六滚珠式设计，（提供六滚珠设计的图片或实物证实），具备防误插功能。
（4）三密封圈、弹片设计，确保各个部件均可拆卸并能正面维护。（提供实物结构图证明）。
（5）有ISO EN737或DIN 13260 认证，吊塔上所配套气体终端须和吊塔为同一品牌，由吊塔制造厂家原厂生产。
2、桥架式吊塔技术参数要求：共2台
2.1、 桥架式吊塔，吊塔主体横梁圆弧形全封闭式设计，表面无锐角，无螺丝钉，吊塔定位准确，下垂头不易漂移。
2.2、 高强度铝镁合金材质，抗金属疲劳强度高，长时间负重不变形。
2.3、 桥架式吊塔横梁长度2200mm-3500mm可供选择，最终可根据医院实际场地情况确定。
2.4、 桥架式吊塔所有电路、气体管道内置于横梁内，通过塔体内走线连接吊头。无需另外通过其他裸露在横梁与吊头之间的管道相连接。
2.5、 桥架式吊塔照明阅读灯，内置于吊塔横梁中, 和吊塔设备一体，节约空间。
2.6、 桥架式吊塔间接照明灯安装位置在横梁朝天花板方向内，灯光向上照射，夜间不影响病人休息。
2.7、 桥架式吊塔干湿区共用，下垂头为吊架式结构，两侧吊杆，中间托盘，前后通透，托盘位于吊头正下方，重心稳固，适宜承载各种规格尺寸的仪器。可以沿横梁水平移动，配备摩擦刹车。提供厂家盖公章图片文字证明文件原件。
2.8、 桥架式吊塔托盘的上下距离可调，可固定在两侧吊杆上任意位置，调整高度后吊杆上不会有任何缺口。提供厂家盖公章图片文字证明文件。
2.9、 桥架式吊塔下垂头吊杆为圆形钢管设计，表面光滑，无缺口。可在吊杆上任意高度位置安装双关节旋转伸展臂、托盘等配件。提供厂家盖公章图片文字证明文件。
2.10、 桥架式吊塔吊架旋转角度≥330°，吊塔的吊头在病床两侧横向运行距离+/-550mm。
2.11、 桥架式吊塔承重负载能力≥250Kg，下垂头起重能力≥150Kg。
2.12、 配置要求：
1）每套下垂头配二层设备托盘，第二层托盘配推拉式抽屉1个， 共3套；
2）双关节旋转伸展臂2个，双臂长300mm+300mm，共2×3个；
3）高度可调输液杆  2个，共2×3个；
4）德制气体插座（干湿区：氧气×5，空气×3，负压×5），共13×3个；
5）12个中制电源终端，共13×3个；
6）网络接口RJ45  2个，共2×3个；
7）配卡箍和夹具保证管、线有序的人性化装置。
  
3、投标人资格要求
投标人应具备的资格或业绩：1、法定代表人授权书；2、投标人营业执照或企业注册证明复印件；3、《医疗器械生产企业许可证》或《医疗器械经营企业许可证》（提供扫描件，原件备查）；4、所投产品必须具有中华人民共和国医疗器械注册证（提供扫描件，原件备查）；5、产品制造商或合法代理商或制造商针对本项目直接授权的供应商（提供相关证明扫描件，原件备查）；6、投标人必须在中国国际招标网（ www.chinabidding.com）注册成会员。境内投标人还须在深圳市政府采购网注册成会员；7、近三年内无行贿犯罪记录（由深圳市政府采购中心定期向深圳市人民检察院申请对政府采购供应商库中注册有效的供应商进行集中查询，投标文件中无需提供证明材料）；8、本项目不接受联合体投标。
是否接受联合体投标：不接受
未领购招标文件是否可以参加投标：不可以
4、招标文件的获取
招标文件领购开始时间：2014-12-16
招标文件领购结束时间：2014-12-25
获取招标文件方式：现场领购
招标文件领购地点：中国广东省深圳市福田区泰然九路金润大厦七楼E单元
招标文件售价：￥400/$65
5、投标文件的递交
投标截止时间（开标时间）：2015-01-06 14:30
投标文件送达地点：中国广东省深圳市福田区泰然九路金润大厦七楼E单元
开标地点：中国广东省深圳市福田区泰然九路金润大厦七楼E单元
6、投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公示。
7、联系方式
招标人：深圳市罗湖区妇幼保健院
地址：深圳市罗湖区太白路2013号
联系人：欧小姐
联系方式 ：86-755-25512749
招标代理机构：深圳市三方诚信招标有限公司
地址：中国广东省深圳市福田区泰然九路金润大厦七楼E单元
联系人：胡宁 李保东
联系方式 ：86-755-82800088-839
8、汇款方式
招标代理机构开户银行(人民币): 中国银行深圳东海支行
招标代理机构开户银行(美元): 中国银行深圳东海支行
账号(人民币): 774457950108
账号(美元): 822808600308092014
 

 

shenzhen sanfangchengxin tendering co.,ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2014-12-16.
1.Bidding Conditions
Overview：Purchase of Multi-functional medical cranes for Maternal And Child Health Care Of Shenzhen Luohu
Source of Funds：Source of funds have been implemented
Description of The Prepared Bidding Conditions：Source of funds have been implemented in this tender, the tender documents have been prepared to improve, with the tender conditions.
2.Bidding Content：
Bidding No：0832-1441SFCXA021
Project Name：Purchase of Multi-functional medical cranes for Maternal And Child Health Care Of Shenzhen Luohu
Place of Implementation：Shenzhen City, Guangdong Province, China
List of Products：
NO.
Product Name
Quantity
Main Technical Data
Remarks
1
Multi-functional medical cranes
1
1, main technical parameters and performance specifications:
1.1, cranes, gas terminal for the same brand, factory production, gas terminal of OEM, outsourcing third party brand goods. Provide written documents.
1.2, cranes with brand positive pressure principle dedicated anesthetic exhaust device, banning the use of negative pressure suction, directly provide anesthesia exhaust device structure graphic description file, prepare material for future reference.
1.3, the rubber material should be used in cranes internal gas hose, shall not use PVC material, prepare material for future reference.
1.4, cranes, bearing the basic dynamic load rating of 10000 kg or more; Basic rated static load or 60000 kg. Should be used in cranes bearing thrust needle roller bearing, the needle roller hardness or 60 HRC. Provide supporting documents.
1.5, cranes with high strength aluminum magnesium alloy materials, fully enclosed design of circular arc form, surface without acute Angle, no screws exposed. Material must be corrosion resistant, easy to clean. Suitable for medical clean environment.
1.6, cranes gas-electric separation design: cranes must have oxygen in the lower end of the box body of effusion hole design, guarantee the smooth oxygen accidental leakage discharge, and prevent the accumulation of oxygen in the tower and the power cord cause fire accident; Must provide photos or physical proof.
(provide documents required, gas terminal 1.7) :
(1) all gas terminal for the original products, brand with cranes. Gas plug with a positive check valve design, to prevent the reverse gas.
(2) all gas interface must take three status: communication, break, pull, plug socket plug can ensure more than 20000 times, with removable type positive maintenance.
(3) all kinds of gas outlet must be in accordance with ISO standard logo are different colors and different shapes, and have six ball type design, (six ball design pictures or physical proof), have mistakenly put prevention function.
(4) three sealing ring and shell design, make sure that the parts are detachable and can be positive maintenance. (provide physical structure of evidence).
(5) have ISO EN737 or DIN 13260 certification, the cranes on the supporting gas terminal and cranes for the same brand, by the original factory cranes manufacturer production.
 
2, bridge frame crane tower technical parameter requirements: a total of 2 units
2.1 posture cranes, bridge cranes main beam totally enclosed design of circular arc form, surface without acute Angle, no screws, cranes accurate positioning and the blue is not easy to drift.
2.2, high strength aluminium magnesium alloy material, metal fatigue strength is high, the load deformation for a long time.
2.3, bridge mounted cranes beam length is 2200 mm - 3500 - mm to choose from, finally according to the hospital actual site situation.
2.4, bridge mounted cranes all circuit, gas pipe in the bar, go through the tower body line hanging head. Need other through other bare pipe connected between the beams with hanging head.
2.5 posture cranes reading lamp lighting, bridge, built into beam cranes, cranes and equipment integration, save space.
2.6, bridge frame crane tower indirect lighting installation location within the beam in the direction of the ceiling, lighting up illuminate, does not affect the patient to rest at night.
2.7, bridge type crane tower dry wet area share, under the blue for the hanger type structure, on both sides of the derrick, the middle tray, connect fully, before and after the tray is located in the crane head directly, centre of gravity is strong, suitable for carrying all kinds of the size of the instrument. Can be along the beam horizontal move, equipped with the friction brake. Provide original factory official seal image text documents.
2.8 and bridge type crane tower tray and distance is adjustable, can be fixed on the two side derrick at any position, adjust the height on the derrick after there is no gap. The official seal image text documents provide manufacturer.
2.9, bridge frame under blue derrick crane tower for circular steel tube design, smooth surface, no gap. Can be any height on the derrick position installed double joint rotation stretch arms, tray and accessories. The official seal image text documents provide manufacturer.
2.10 frame crane, bridge crane frame rotation Angle 330 °, or cranes hanging head on both sides of the bed transverse distance running + / - 550 - mm.
2.11, bridge mounted cranes bearing load capacity 250 kg or more, under the blue hoisting capacity 150 kg or more.
2.12 requirement, configuration information:
1) blue with 2 devices under each tray, the second drawer tray with a push-pull type 1, a total of 3 sets;
2) Rotation stretch arm 2, double arms 300 mm + 300 mm long, 2 x 3;
3) the height is adjustable infusion rod 2, a total of 2 x 3;
4) din gas outlet (dry and wet area: oxygen x5, air x 3, negative pressure 5), a total of 13 x 3;
5) 12 Chinese system of power supply terminals, a total of 13 x 3;
6) network interface RJ45 2, a total of 2 x 3;
7) band and fixture ensure pipe, line orderly humanization device.
  
3.Qualification Requirements For Bidder
Qualifications or Performance：1) Power of Attorney; 2) Bidders’ business license or certificate of registration (Business scope shall include the tendering goods); 3) Sales license for the medical apparatus (supplied according to requirements of bidder’s country or region) ; 4)the product must have the People's Republic of China cast Medical Device Registration Certificate (provide scanned copies, the original reference); 5) the product manufacturer or legitimate dealer or manufacturer directly for the project authorized supplier (provide proof of a scanned original reference); 6) bidders must register as a member at the China International Tendering (www.chinabidding.com). Domestic bidders must register as a member on the Shenzhen Municipal Government procurement network; 7) The last three years no bribery crime record (by the shenzhen municipal government procurement center regularly apply to the shenzhen city people's procuratorate for government procurement suppliers library registration effective supplier for centralized queries, do not need to provide documents in the bid documents) ; 8) The project consortium does not accept the bid.
Joint Bids：NOT Available
Bid without the bidding documents：NOT Available
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents：2014-12-16
Ending of Selling Bidding Documents：2014-12-25
To Obtain：On-site Purchase
Place：7E, JinRun Building, No.9 TaiRan Road, Futian district, Shenzhen, Guangdong, China.
Price of Bidding Documents: ￥400/$65
Additional Instructions：
5.Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)：2015-01-06 14:30
Place of Bid：7E, JinRun Building, No.9 TaiRan Road, Futian district, Shenzhen, Guangdong, China.
Place of Bid Opening：7E, JinRun Building, No.9 TaiRan Road, Futian district, Shenzhen, Guangdong, China.
6.The evaluation results will be released on www.chinabidding.com。
7.Contact Details
Purchasers：Maternal And Child Health Care Of Shenzhen Luohu
Add.：no. 2013, Taibai road, Luohu district,Shenzhen, Guangdong, China.
Contact：Ms Ou
Tel：86-755-25512749
Bidding Agency：shenzhen sanfangchengxin tendering co.,ltd
Add.：7E, JinRun Building, No.9 TaiRan Road, Futian district, Shenzhen, Guangdong, China.
Contact：Mr. Hu and Mr. Li
Tel ：86-755-82800088-839
8.Remittance Approach
Bank(RMB):Bank of China Shenzhen Donghai Branch
Bank(USD):Bank of China Shenzhen Donghai Branch
Account NO.(RMB):774457950108
Account NO.(USD):822808600308092014

上一篇: 聊城市食品药品检验检测中心食品实验室改造项目招标公告

下一篇: 大连大学护理学院实验室设备采购项目更正公告

  • 官方抖音

    官方抖音

  • 官方公众号

    官方公众号

广东省洁净技术行业协会 版权所有   粤ICP备2020090475号-1